P1024 Chevrolet / GM Diagnostic Trouble Code
Detailed technical diagnosis, symptoms, common causes, inspection procedures, and estimated repair costs.
⚠️ Can I Drive With Code P1024?
Safe to drive to a repair shop or home, but arrange inspection soon to maintain optimal efficiency and pass emissions.
🚨 Symptoms of Code P1024
- Check Engine Light (CEL / MIL) illuminated on dashboard
- Vehicle stored diagnostic trouble code in PCM memory
- Possible reduction in engine performance or fuel economy
- System operating under fail-safe or default backup parameters
🔍 Most Common Causes for Code P1024
- Faulty or degraded sensor related to powertrain control system
- Damaged, corroded, or loose wiring harness connector
- Intermittent short circuit or open circuit to ground / reference voltage
- Software update required or internal controller calibration fault
🛠️ Step-by-Step Diagnostic & Multimeter Inspection Procedure
- Connect an OBD-II / EOBD scan tool and verify active and pending P1024 codes
- Inspect wiring harness and connector pins for corrosion, bent pins, or thermal damage
- Check circuit power and ground with a digital multimeter (DVOM)
- Review manufacturer Technical Service Bulletins (TSBs) for known vehicle issues
Common Diagnostic Mistake to Avoid: Replacing the sensor before verifying wiring harness continuity, supply voltage, and ground connection.
Frequently Asked Questions — P1024 DTC
What does OBD-II code P1024 mean?
Code P1024 stands for 'Manufacturer Specific (Chevrolet / GM) Powertrain Control System DTC P1024'. It indicates an issue detected by the powertrain or control module within the Powertrain Control System.
Can I continue driving with code P1024 active?
Safe to drive to a repair shop or home, but arrange inspection soon to maintain optimal efficiency and pass emissions.
What are the most common causes of code P1024?
The most frequent root causes include: Faulty or degraded sensor related to powertrain control system, Damaged, corroded, or loose wiring harness connector, Intermittent short circuit or open circuit to ground / reference voltage.
How much does it typically cost to fix code P1024?
The average repair cost for code P1024 ranges from $65 – $420, depending on whether it requires a basic sensor replacement, wiring repair, or major mechanical component.