P0748 Diagnostic Trouble Code: SAE Standard Generic Transmission Control System DTC P0748
Detailed technical diagnosis, symptoms, common causes, inspection procedures, and estimated repair costs.
⚠️ Can I Drive With Code P0748?
Avoid aggressive driving. Have the vehicle diagnosed promptly with an OBD-II scanner to prevent secondary component damage.
🚨 Symptoms of Code P0748
- Check Engine Light (CEL / MIL) illuminated on dashboard
- Vehicle stored diagnostic trouble code in PCM memory
- Possible reduction in engine performance or fuel economy
- System operating under fail-safe or default backup parameters
🔍 Most Common Causes for Code P0748
- Faulty or degraded sensor related to transmission control system
- Damaged, corroded, or loose wiring harness connector
- Intermittent short circuit or open circuit to ground / reference voltage
- Software update required or internal controller calibration fault
🛠️ Step-by-Step Diagnostic & Multimeter Inspection Procedure
- Connect an OBD-II / EOBD scan tool and verify active and pending P0748 codes
- Inspect wiring harness and connector pins for corrosion, bent pins, or thermal damage
- Check circuit power and ground with a digital multimeter (DVOM)
- Review manufacturer Technical Service Bulletins (TSBs) for known vehicle issues
Common Diagnostic Mistake to Avoid: Replacing the sensor before verifying wiring harness continuity, supply voltage, and ground connection.
Frequently Asked Questions — P0748 DTC
What does OBD-II code P0748 mean?
Code P0748 stands for 'SAE Standard Generic Transmission Control System DTC P0748'. It indicates an issue detected by the powertrain or control module within the Transmission Control System.
Can I continue driving with code P0748 active?
Avoid aggressive driving. Have the vehicle diagnosed promptly with an OBD-II scanner to prevent secondary component damage.
What are the most common causes of code P0748?
The most frequent root causes include: Faulty or degraded sensor related to transmission control system, Damaged, corroded, or loose wiring harness connector, Intermittent short circuit or open circuit to ground / reference voltage.
How much does it typically cost to fix code P0748?
The average repair cost for code P0748 ranges from $65 – $420, depending on whether it requires a basic sensor replacement, wiring repair, or major mechanical component.